Shure PSM 200 In-Ear Wireless Monitor System w/ SE215-CL Earphones

Write A Review

New, In Stock


The Shure P2TR215CL in-ear wireless system features the Shure PSM 200 Monitors which are a practical alternative to floor wedges for performers who want to start out In Ear and stay there. Featuring smart, versatile components that grow with you as your needs change, PSM 200 is the personal monitoring breakthrough for entry-level performers. System includes the P2T wireless transmixer, P2R Hybrid bodypack receiver and SE215-CL earphones.

Shure PSM 200 In-Ear Wireless Monitor System (H2 Band:  518 - 554 MHz) Features:

Shure In-Ear SE215-CL Earphones:
  • Speaker Type:   Single Dynamic MicroDriver
  • Sensitivity (1kHz):   107 dB SPL/mW
  • Noise Attenuation:   Up to 37 dB
  • Frequency Range:   22Hz – 17.5kHz
  • Input Connector:   Gold-plated 3.5 mm (1/8”)
  • Cable:   64” Detachable (at ear) with wireform fit
Shure P2T Wireless TransMixer:
  • RF Output Power:   30mW (+15dBm) typical conducted (country dependent)
  • Modulation Limiter:   Internal peak limiter (>10:1 hard knee compression)
  • Antenna:   1/4 wavelength, semi-rigid, PCB mount
  • Audio Input Connector type:   XLR - 1/4" combo
  • Configuration:   Electronically balanced
  • Nominal Input Level:   25dBu @ 1/2 volume (12 o'clock)
  • Maximum Input Level:   5 dBu @ 1/2 volume (12 o'clock)
  • Pin Assignments:   XLR: 2 = hot; 3 = cold; 1 = ground, 1/4": Tip = hot, Ring = cold, Sleeve = ground
  • Phantom Power Protection:   Up to 52Vdc
  • Current:   170mA maximum
  • Dimensions:   8.6"x5.6"x1.7"
  • Net Weight:   13oz
  • P2T Audio Outputs, Passive connection parallel with input; Connector type: XLR
  • Output Configuration:   Electronically balanced
  • Output Pin Assignments:  2 = hot; 3 = cold, 1 = ground
  • Power Requirements:   Operating Voltage 12-18Vdc
Shure P2R Hybrid Bodypack Receiver Specifications:
  • RF Sensitivity:   -109dBm typical
  • Squelch Threshold:   -102dBm typical
  • Antenna:   Attached Whip
  • Audio Input Connector Type:   1/4" mono
  • Impedance: 1   megaohm
  • Maximum Input Level:   LO = +0dBu, HI = 10dBu
  • Frequency Response:   30Hz to 20 kHz (+/-3dB); earphone dependent
  • Power Requirements:    9V alkaline battery
  • Battery Life:   Volume dependent; Wired (RF off): 6hrs, Wireless (RF on): 4 hours
  • Audio Output Connector:   1/8"
  • Minimum Load Impedance:   8 ohms
  • Net Weight:   3.52oz (without battery)
  • Overall Dimensions:   4.809" x 2.875" x 1.251"

The Shure P2T Wireless TransMixer is a breakthrough design for personal monitoring. It allows the user to connect two line-level or mic-level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer.

The Shure P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time.

Featuring Dynamic MicroDriver, the SE215 delivers detailed sound with enhanced bass. A detachable cable with formable wire enables easy replacement and a secure, comfortable fit on-stage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit. 


Manufacturer Shure


Separate tags with spaces. Wrap multi-word tags in single quotes. Example: 'New York' Manhattan

Write A Review

Reviewing: Shure PSM 200 In-Ear Wireless Monitor System w/ SE215-CL Earphones

Customer Reviews

This product has not been reviewed. You could write the first review.